Lario Model Cover

Installation service available on request

This cover protects your vehicle from hail, rain, sun, and snow. In the event of snow, we recommend removing excess weight to prevent overloading. Without such precautions, Co.AR.CA Ltd accepts no liability. The Lario Model Cover also shields against pollution and other forms of wear caused by atmospheric agents.

Technical specifications: PVC fabric, double-coated, 700 g/m², waterproof, highly resistant, Class 2 self-extinguishing, heat-sealed.
The cover is closed on three sides, while the front side remains open. The structure is made of hot-dip galvanised iron ø 40×2 with ø 45×2 connecting joints, a material that does not rust.
The structure is extremely robust since, along the lower and upper perimeter, between each span (excluding the front/entrance side), cross connections are installed to keep the entire structure compact and stable.
On the roof, to ensure compactness and to prevent water pockets or deformations caused by snow, an additional arch is inserted between each frame. At the base joint of every support post a 100×100 mm plate is provided with four ø 10 mm holes at the corners for anchoring with plugs.

Lario Model Cover diam. 40:

• ITEM CODE 10.200.01 DIM.5,00X3,00XH3,80  |  RIDGE HEIGHT – CLEARANCE MT 3.50
• ITEM CODE 10.200.02 DIM.6,00X3,00XH3,80  |  RIDGE HEIGHT – CLEARANCE MT 3.50
• ITEM CODE 10.200.03 DIM.7,00C3,00XH3,80  |  RIDGE HEIGHT – CLEARANCE MT 3.50
• ITEM CODE 10.200.04 DIM.8,00X3,00XH3,80  |  RIDGE HEIGHT – CLEARANCE MT 3.50
• ITEM CODE 10.200.05 DIM.5,00X3,50XH3,80  |  RIDGE HEIGHT – CLEARANCE MT 3.50
• ITEM CODE 10.200.06 DIM.6,00X3,50XH3,80  |  RIDGE HEIGHT – CLEARANCE MT 3.50
• ITEM CODE 10.200.07 DIM.7,00X3,50XH3,80  |  RIDGE HEIGHT – CLEARANCE MT 3.50
• ITEM CODE 10.200.08 DIM.8,00X3,00XH3,80  |  RIDGE HEIGHT – CLEARANCE MT 3.50

Lario Model Cover diam. 60:

• ITEM CODE 10.201.01 DIM.5,00X3,00XH3,80  |  RIDGE HEIGHT – CLEARANCE MT 3.50
• ITEM CODE 10.202.02 DIM.6,00X3,00XH3,80  |  RIDGE HEIGHT – CLEARANCE MT 3.50
• ITEM CODE 10.203.03 DIM.7,00C3,00XH3,80  |  RIDGE HEIGHT – CLEARANCE MT 3.50
• ITEM CODE 10.204.04 DIM.8,00X3,00XH3,80  |  RIDGE HEIGHT – CLEARANCE MT 3.50
• ITEM CODE 10.205.05 DIM.5,00X3,50XH3,80  |  RIDGE HEIGHT – CLEARANCE MT 3.50
• ITEM CODE 10.206.06 DIM.6,00X3,50XH3,80  |  RIDGE HEIGHT – CLEARANCE MT 3.50
• ITEM CODE 10.207.07 DIM.7,00X3,50XH3,80  |  RIDGE HEIGHT – CLEARANCE MT 3.50
• ITEM CODE 10.208.08 DIM.8,00X3,00XH3,80  |  RIDGE HEIGHT – CLEARANCE MT 3.50

Upon request:
Item Code 10.204.02 Anchor Bolt Kit to be inserted into the 100×100 mm plate with 4 ø 10 mm holes at the corners for bolt insertion.

Item Code 10.204.04 Peg Kit – if anchoring with bolts is not required, we alternatively provide on request an L-shaped iron peg 50×50 mm, 500 mm long, with S-hook, mounted on the crossbeam at the base of each span.

Item Code 10.205.01 System Block Kit consisting of 2 shaped galvanised iron frames equipped with dedicated plates, fixed by exploiting the weight of the motorhome.

The structure is closed on three sides, while the front side remains open.
The entrance front cannot be fully closed but only partially, since the dimensions do not technically allow complete closure of the entrance front. As an alternative, upon request, we can provide a PVC panel with eyelets on 3 sides and 2 S-hooks to be fixed onto the front supporting posts of the entrance.

Item Code 10.100.01 PVC panel/head kit 2.90 x H 2.00 m for front closure of Lario Model Cover with width 3.00 m

Item Code 10.100.02 PVC panel/head kit 3.40 x H 2.00 m for front closure of Lario Model Cover with width 3.50 m